Video Products Computer Hardware RJ45 5EWTP QR PCB User Manual

Aurora,Ohio 44202

Fax: 330-562-1999

VIDEO

PRODUCTS

INCORPORATED

1275 Danner Drive

Tel: 330-562-2622

VPI

Weatherproof Cable Shield Assembly Procedure

For Outdoor CAT5/5e/6/6a Shielded Cable Installations

The Weatherproof Cable Shield is a water-tight cable restraint to be applied to

shielded Cat5/5e/6/6a cable to make a weatherproof cable connection to outdoor enclosures.

To make sure the connection is waterproof upon completion, follow the steps below.

1. Insert the seal ring into the housing.

2. Strip the CATx shielded cable jacket (6mm-7mm O.D.) approximately ½” and insert the cable through the

sealing nut, screw nut, and housing. (Note: Heat shrink tubing can be applied to cable to increase the O.D. to

6mm-7mm.)

housing

screw nut

sealing nut

CATx cable

strip approx. ½”

Note: CATx cable

used must be

shielded cable.

3. Terminate the CATx shielded cable with an RJ45 connector.