Walker TV Mount CMWF42 1 User Manual

Item #: V42MWF

Assembly Instructions

For our most current instructions, to request missing, lost or broken parts, or for any other Customer

Service issues, please visit our website at www.walkeredison.com or call us at 877-207-5906.

Revised 11/2011

Parts List

Hardware List

Bolt

Suction cup pin

Bolt

Flange bolt

Bolt

TV Mounting Hardware List

Bolt

Screw cam bolts (1) into legs (A,B).

Insert cam locks (2) into front panels (C,D). Attach legs (A,B) to front panels (C,D) using cam bolts as guides.

Tighten cam locks (2) with a screwdriver.

Attach crossbars (E,F) to front panels (C,D) using bolts (3) and washers (4). Note that the predrilled holes on

the lengths of crossbars (E,F) will face up. Tighten bolts (3) with wrench (12).

Attach crossbars (E,F) to lower cable management system (G) using bolts (3) and washers (4). It may be

necessary to slightly loosen the bolts from Step 3 in order to align crossbars (E,F) properly. Tighten all bolts (3)

with wrench (12).

Screw suction cup pins (5) into crossbars (E,F). Screw pins (6) into legs (A,B) and lower cable management

system (G). Insert rubber pads (9) into legs (A,B).

Attach upper cable management system (H) to lower cable management system (G) using bolts (7) and

washers (4). Tighten bolts (7) with wrench (12).

Attach pivoting bracket (I) to upper cable management system (H) using bolts (14) and washers (4). Tighten

bolts (14) with wrench (12).

Attach base bracket (J) to pivoting bracket (I) by inserting bolts (14) with washers (4) through base bracket (J)

and pivoting bracket (I) as shown above. Then, screw nuts (8) with washers (4) onto bolts (14). Using

wrenches (12,13) together, firmly tighten bolts (14) and nuts (8).

Attach mounting brackets (K) to the TV using the appropriate hardware from the TV mounting hardware kit.

Appropriate hardware will vary depending on TV type. Attach tilt adjustment knobs (10) to mounting brackets

(K) using flange bolts (11).

Two people are recommended for this step!

Loosen the adjustment knobs at the base of mounting brackets (K). Carefully hook mounting brackets (K) onto

base bracket (J). Tighten the adjustment knobs at the base of mounting brackets (K) to secure the TV to the

mount. To adjust the tilt of the TV, loosen tilt adjustment knobs (10), tilt TV up or down then tighten tilt adjustment

knobs (10).

Carefully slide glass shelves (M) into place. Carefully place glass shelf (L) on top of the stand and gently push

down to secure.